jose rodriguez

[jose rodriguez]

HOW ARE THESE USED IN SCHEMATIC DIAGRAMS CORRECT?

[jose rodriguez]

GREAT STUFF THANKS VERY MUCH FOR CLARYFYING THIS FOR ME VERY HELPFUL.

[jose rodriguez]

k thannks for helping me understand all this.

[jose rodriguez]

so these types of readings are found in 220 v only? how do u identify them?

[jose rodriguez]

HI WHEN U HAVE A SHUNT OR SHORT IN A CIRCUIT. IS THE SHUNT OR SHORT FIXABLE?
OR IS IT A DEAD MACHINE?

[jose rodriguez]

k thanks for ur valuable info have a great day. i will definitely consider the refridgerator course thanks again for ur help.

[jose rodriguez]

great info thanks. ONE MORE QUESTION ON THE 3RD VIDEO OF THIS TOPIC U ALSO ALK ABOUT FAILURE MODES ON MOTORS AND COMPRESSORS SPECIFICALLY AT EXTERNAL ELECTRICAL WERE U TALK ABOUT A FAAILURE IN THE MOTOR FROM HEAT STRESS.. ON THIS SPECIL OCASSION WHEN THE MOTOR FAILS BC OF HEAT STRESS HOW DOES THE COMPRESSOR ACT DOSENT TURN OR WILL TURN ON FOR ACOUPLE SECONDS THEN WILL TURN OF?

[jose rodriguez]

Hi Susan yes I’m talking about unit 4 my question is about EEPS the characteristics it mentions 2 types.

Also on the videos Scott showed he measured got zero volts when measuring this eep concept

[jose rodriguez]

Yes correct k great things are making sense now thanks for ur patience and help 🙂

[jose rodriguez]

Hi susan k so if it fails that means current could no longer flow bc its an open circuit is that right?

[jose rodriguez]

one more question so ur saying that line 1 [hot] and line 2 [neutral] are able to Add up to make 240vac?

[jose rodriguez]

great makes sense thanks samuraii :]

[jose rodriguez]

on the division problem 1/10 i also get 0.1 u show 0.10 do u manually input the zero jus asking for future reference

[jose rodriguez]

hi scott hope everything went well for u today.. go ur message nd i appreciate ur swift response
i did the equation and divided 1/12 and got 0.08333333 is that the same as 8.3 jus want to make sure im understanding everything correctly.. thanks again scott gn.

[jose rodriguez]

HI, Scott Jose here thanks for the feedback really appreciate ur help..
so I’m understanding it better now only thing is when I divide 1/10 I get 0.1
then when I divide 1/50 I do get 0.02 then once I add 0.10 + 0.02 I get 0.12 while u show 0.102 this is were I get confused?

[Author]

Posts