This was for another question on the Final
What do loads need to operate (to do work)?
I put down voltage firs attempt on the second I thought for sure it was going to be current but that was wrong?
can you please help with this?
ok thank you, also for question #4 it states Gas appliances are connected _____ of the gas regulator I had put upstreeam and it was incorrect
I read more in the material and there’s nothing that specify where it should be the only thing i see is The outlet of the regulator is connected to the appliance and so is at the regulated pressure.
I had the same issue for this and I answered The diaphragm develops a leak and unregulated gas pressure is sent downstream which is incorrect.
would it be ”To relieve gas pressure buildup below the diaphragm in case the diaphragm develops a leak”
Hello,
ok sounds good thank you, I think that’s what happened internet issues
if worse case scenario i don’t pass with the 2 attempts originally Am i sill able to get another reset? since this issue happened
States Module 7 unit 3 Quiz The gas pressure in a natural gas service line ranges from.
I am thinking it should be 1660inches wc to 7 inches wc
in the reading material it says with gas flowing at a pressure range of over 60 psi to as low as ¼ psi (about 7″ wc). my assumption would be to use the equation 1psi=27.7 wc 60psix27.2 wc= 1662 roughly would that be accurate?
I watched the 2nd video as well for what leg is missing and put L1 which after re-watching it again i would think it be L2? after running it live he got 120V for both L1 and L2 can you clarify that?
