Joe Landers

[Joe Landers]

ok thanks. I will let you know when I receive it.

Joe

[Joe Landers]

HI I was wondering if you had a chance to send my Certificates yet? Hope all is well I am starting at Mr Appliance on Monday very happy to be getting started

Thanks
Joe Landers

[Joe Landers]

Great thanks so much !!

[Joe Landers]

Awesome thank you !!

[Joe Landers]

I watched the video again and if you measure with a meter across L1 L2 on a 208vac you will read 208VAC ? But if you measure from L1 to N or L2 to N you will read 120 VAC ? Just not sure if I have this right lol.

Joe Landers

[Joe Landers]

ok so for question 8 Black wire supplies the line, see i was looking up at the top where Main PCB is showing wires going between the PCB Heater
and for question 9 it is switching N ?

[Joe Landers]

Apprx. 2 ?

Joe Landers

[Joe Landers]

the equivalent resistance of the compressor windings is something less then 4.4 ohms?

Joe Landers

[Joe Landers]

Ok I see it now, L2 goes directly to the motor without a switch, powering the windings, and as the motor starts the start winding will drop out. L1 is not powering the windings at all, as it goes through M2 and M10 then switch makes and L1 then supplies power to the heater element and on to the fabric selector switch. Also when L1 goes through the heater it completes back to L2.

Thanks again I feel a lot better about these 3 questions now

Joe Landers

[Joe Landers]

Ok, Thanks for questions 4 and 8 I cant believe I didnt see the answers first time. On question 12 I see on the schematic that L1 supplies power to M2 on the motor. I am still not 100% on that question. Is the power coming from L2 and back through N?

Thanks again for the help!!!

Joe Landers

[Joe Landers]

OK, I think I was so confused because I was including the lights bi-metal with the protectors or other bi-metal. Thanks for hanging in there with me, I really appreciate it.

Joe Landers

[Joe Landers]

Thanks for all the help, but I am just not seeing it for question 2.

Joe Landers

[Joe Landers]

I took the quiz again, I understand clearly questions 1 and 3 now. I am still confused with question 2. if you would please re-set the quiz, I feel like i am just guessing on this question and that is not what I want to do.

Joe Landers

[Joe Landers]

Also it is labeled
Hot Light switches in protector attached to each surface element

[Joe Landers]

ok I was looking at the top of the Schematic I did see the LF around the mid right side with the other 3 surface burners, I thought the top was a blow up of the the burners and light. So when the switch closes L1 goes through the light and back to L2 through the red wire? I am still lost on the H1-H2 question.

Joe Landers

[Author]

Posts