Joshua bans lima

[Joshua bans lima]

Question 9. The fact that I’m reading O from L1 and N is that L1 missing and reading o vac

[Joshua bans lima]

Ok how do I find that topic

[Joshua bans lima]

Question 9. L2 is not present. When you disconnect it it’s just reading L1 threw out the circuit . l2 is open

• This reply was modified 2 months ago by Joshua bans lima.

[Joshua bans lima]

[answer hidden]

• This reply was modified 2 months ago by Susan Brown.

[Joshua bans lima]

Ok so the switch has no resistance or load so [answer hidden]

• This reply was modified 2 months ago by Susan Brown.

[Joshua bans lima]

Main coil igniter and booster 40 vd each due to being in series

[Joshua bans lima]

I need another hint. The main coil igniter and booster are in series so same current threw out with a 120 vd. Watched the video over and over can’t get the point

[Joshua bans lima]

120 vd

[Joshua bans lima]

So with question 8 I looked over the video in unit 5 series Parallel portion it explains that in the parallel portion the voltage with vary but it will be equal three out that portion so with being 2 loads ( Ingnition/booster ) would it be splitting the 120vac

[Author]

Posts