Smashycomman

[Smashycomman]

Ah! Ok! So what I should be focusing on in this question is more of a “which board” thing, and less of a “which input” thing. I think I get it. 😀

From what I can see on the schematic… it seems like the pressure sensor and thermistor don’t go to the main PCB, but to the PCB sub instead..

Since I already tried “water level”.. I guess it’s going to have to be “water temperature”?

I was confused, since the Fast Track said “Peripheral (Main PCB) input Tests” … but I guess the FT isn’t completely correct, then?

[Smashycomman]

I’m sorry! I figured you’d look at it and say “oh, I forgot to put in the right answer” or something… I thought it was just a mistake… umm… I’ll explain why. Sorry. :/

So I’m sure I’m probably completely wrong about this, but it looks like the 4 input methods ARE the 4 choices on there… and that there are none that aren’t an input of the PCB..

First choice is “water temperature”… and the 1st input on the fast track manual is “Water Temperature will be displayed in Fahrenheit”

Second is “door status” and the FT says “The door status will be displayed (OP if open,
CL if closed).”

3rd is “door lock switch status”, FT says “The door lock Switch status is be displayed (UL = unlocked, Lo = locked).”

And finally, the 4th is “water level” and the FT says “Water Level Frequency will be displayed.”

I originally selected “water level”, since the FT says “Water level frequency”… but that was wrong.

I guess maybe I’m confused about something? It seems like every choice IS in the FT, so… help? 🙂

Again, sorry for not asking a more specific question… I honestly thought this question was maybe put in the quiz incorrectly or something and I was just trying to bring it to your attention. Thank you for your help!

[Smashycomman]

Ok, there we go! Yeah, I just had to review that screencast. Thank you!

It’s these ones with math…. even though you explain it well, and I understand it… I just don’t like math. I never have. It’s my left-braindedness or whatever. 🙂

[Smashycomman]

Uh… I also need my quiz reset… Unless you think I should be reset to a certain point. Thank you. 🙂

[Smashycomman]

Ah, yes, I did mean 6 & 7. Sorry.

And yes, that all makes a lot of sense. I don’t know why I couldn’t get it, but I get it now. Thank you.

[Smashycomman]

Yeah, I understood it… just wasn’t careful enough with where I was clicking.

I need to slow down and take my time. 🙂

Thank you, again!

[Smashycomman]

Dang it! I figured it out on the questions I had gotten wrong before, but mis-clicked on the last question. These limited attempts are brutal for those not paying 100% attention like me. 😛

If you feel like you need to reset me back to the beginning of the course, I understand. 🙂

[Smashycomman]

Ah, OK makes sense. Thank you!

[Smashycomman]

Did you mean unit 2? Because if so, I also got tripped up on these questions. I need my quiz reset. :\

[Smashycomman]

Ok, thought so! Thank you very much for making it so easy to understand. 😀

[Smashycomman]

Thank you!

[Smashycomman]

Dang, ok I must have been distracted by the baby. I blame him. 🙂 And yeah, I’ve been going through, studying all the new content. Again, thank you for letting us graduates get the updates for free! 😀

And I think I’ll need that quiz reset, I guess. I made the mistake of guessing at those questions…. 3 times. Let that be a lesson to everyone else! If you fail a quiz, don’t go back and try to guess at it. You’ll just fail. Get some help first! The help is there for you. Use it.

[Smashycomman]

Ah, thank you very much! Hopefully it’ll work that way! 🙂

[Author]

Posts